Takegawa XR100 5 Disc Reinforced Clutch Kit

Increases clutch capacity and prevents slippage by adding a friction disc to the normal clutch.
This product can be used for high power engine by increasing the bore. (Can be installed with stock engine and stock clutch cover at the same time.)
The number of clutch dampers has been changed from the stock 4 to 6 to increase the damper capacity.
The oil pump reduction ratio has been changed from 2.187 to 1.833 to increase the amount of oil discharged per engine revolution.
The primary reduction ratio has been changed from 4.437 to 3.833, approximately 16% higher gearing and a wider selection of drive sprockets.
Clutch springs are strengthened by 10% compared to the Ape100.
Cast iron is used for the clutch center and the friction disc contact surface of the pressure plate to improve durability.
The lifter plate, guide pins, and bearing flange bolts are reused from the original parts.
Since the primary reduction ratio is changed, the sprocket needs to be reset.